 Functionality of the protective d

 Functionality of the protective door EMERGENCY STOP button on the control panel3.2.1 Operator protectionThe operator protection offers protection against hydraulic oil escaping underhigh pressure (splash oil) and against bursting parts in the case of possiblydefective test items. It consists of impact-resistant Makrolon door elementsthat protect the operator's head and torso. The operator's arms and hands areprotected by personal protective equipment (work clothing).3.2.2 Personal protective equipmentTo reduce the risk of residual hazards, the following protective equipmentmust be worn when operating the system: Protective gloves on both hands Safety work shoes all-round protective gogglesProtective housingThe entire system is enclosed by a protective housing. This housing alsoserves to reduce noise. This includes the door.3.2.3 Other protective measuresThe maximum permissible oil pressures are guaranteed by pressure reliefvalves.In the event of a leak or broken valves, hoses and pipes, the oil pans can holdthe entire volume of oil, so that no environmental damage is caused by leak-ing oil.3.3 Preparing the system for useThis chapter describes all the measures that are required to prepare the sys-tem. This includes transport, assembly and correct commissioning. Thischapter is important for the operator, but does not concern normal operationof the system.3.3.1 Transport informationOnly suitable, undamaged and fully functional means of transport with suffi-cient load-bearing capacity may be used to transport the system. Transport di-mensions and transport weight (max. Installation weight) must be observed.The required transport safety devices and transport devices must be attachedbefore the start of transport. To do this, they are to be attached to the desig-nated locations.Please note the following points: Secure against slipping