This is the configuration for the s

This is the configuration for the servo controller. These settings can changethe test sequence if necessary.; CIFX[CIFX]...Please do not make any changes to the CIFX configuration. Under certain cir-cumstances, this can endanger the system and the operator.Changes to the config.ini file may only be made by appropriately trained spe-cialists.3.3.5 Storage and protection between intervals of normal useIf the system is not required for a longer period of time and intermediate stor-age is necessary, the system should be packed in a dust-tight manner andstored in a dry place at a constant room temperature between 18 ° and 25 °C. Proceed as follows:1. Switch off the system and let it cool down2. Disconnect the power supply3. Pump all oil out of the tanks4. If necessary, close open hose ends well with a cloth5. Thoroughly clean accessible areas of the system with a cloth6. Place the system on a stable wooden pallet and transport it to the stor-age areaBefore storing, you should make a data backup of the test bench computer.Please note that data on burned media can only be read for approx. 5 years,even if stored properly. In any case, the storage medium should be stored in acool, dry and dark place. Adt-Rinck GmbH recommends data backup on anexternal hard drive.3.3.6 Notes on dismantling and decommissioningWhen the system is finally shut down, it is recommended that the systemparts be dismantled into individual assemblies and disposed of separately.